English Site


OPS Series
Linear Programmable DC Power Supply

High Precision, High Responsibility, High Efficiency Single Channel

OPS Series is high efficiency, high performance programmable DC power supply RS232C & GPIB (IEEE-488.2) interface based on SCPI (Standard Commands for Programmable instrument) protocol. In addition, It is designed to be equipped in 3U*19inch Half-Rack instrument) protocol. In addition, It is designed to be equipped in 3U*19inch Half-Rack.

  • Protection against over-voltage (OVP) / over current (OCP)
  • Save and recall up to 10 operation states (voltage, current, OVP, OCP)
  • Save and confirm up to 10 error messages
  • Self-diagnosis test mode
  • Supports up to 100 cycling modes (voltage, current slope and delay time)
  • Support for external software calibration without inside calibration.
  • Factory function provided (memory initialization and correction date back-up and recovery)
  • RS-232C standard (GPIB option)

Let˙s use the powerful store function!
OPS Series can save and recall up to 10 voltage and current, OVP, OCP that the user sets up. Even when a user is not an engineer, the user can use it for the production and product inspection, reliability test with the function for recalling the pre-set and stored data.

How does our company˙s productivity rank in the industry?
Our Programmable DC Power Supply is ideal for the FA system development since it can judge at least 30 equipments whether they are pass or fail within one second. It is possible to provide fine and precise source one using this product alone, since it has built-in 24 bit ADC. Likewise, it measures even the fine voltage and electric current. Thus, it is possible to reduce budget since it does not require separate voltage/ current measurement device at the outside.

Experience the upgraded stability
Even when the equipment˙s internal temperature changes or even when there are external factors that influence while conducting test for a long time due to the Temperature Compensation Circuit and real-time measurement Compensation Circuit that are applied to the OPS Series, it is possible to conduct test in an accurate and stable manner while maintaining the set up voltage.


Now, use it with peace of mind. [Protection Mode]

Using the over-voltage (O.V.P) and over-current (O.C.P)mode that are built in the OPS Series blocks the output over-voltage or over-current to protect the source of over-load, and it can be used safely even in case of user negligence or when conducting test for a long time. Moreover, it is possible to reduce the defect rate of the production line by blocking malfunction caused by user˙s negligence.

Why? Why is the output voltage different from the set up voltage?
Remote Voltage Sensing

Power supplier that does not provide V-Sensing may not offer an accuracy level that a user wants. ODA Technologies˙s Programmable DC Power Supply provides V-Sensing (Remote Voltage Sensing) function to produce compensation output when it comes to the voltage that is damaged due to the cable˙s specific resistance property in order to supply increasingly precise power.


Now, measure immediately without delay after the output setting!
Competitor˙s products require delay for a specific period of time in order to obtain accurate measurement value after the setting order is communicated. Even when the order for setting is communicated, Analog Controller˙s responsiveness is late. Thus, error may result in which measurement takes place while output voltage is increasing. Meanwhile, it is necessary to collect data impeccably only when measurement takes place after waiting for the setting of the output voltage and electric current is completed. Our company˙s programmable power supply can work with 2 ms to conduct 15 V setting in the 0V.

The work can be carried out even when there is no program developer present.
Cycling Mode TEST!
Cycling Mode that is provided to the OPS Series provides memory so that up to 100 gradient and maintenance time of the voltage, electric current can be stored. When cycling Mode is used, it is possible to develop the system for the long-time reliability test for the product with ease without producing the Windows Application. Moreover, it is possible for the voltage and electric current to supply powers that are different in a regular, consistent manner to the mechanical device and facility besides the reliability test.


Pyramidal wave materialization
It is possible to materialize the output of the pyramidal wave by receiving the Arbitrary Function Generator˙s input voltage with the Analog Input.

לקוח יקר, אנא אשר כי קראת והינך מבין ומאשר כי ידוע לי שתנאי תשלום העסקה הינם מסירת צ'ק במועד קבלת הסחורה, תוך 15 ימי עסקים וכי קראת את תנאי המכירה של חברת הוריזון אלקטרוניקה
לקבלת מידע נוסף